Homeowners and business owners in Singapore alike can sometimes ignore the dangers of electricity. Because there are now so many devices that need to be plugged in and switched on to work, it’s actually not that hard to imagine how likely electric overloads can be.
When a current going through a circuit exceeds the circuit’s capacity, this can result in an overload. This may be because you have too many electrical devices plugged into the same outlet, or if an appliance exceeds the current capacity.
When these overloads do happen, there are usually safety features (i.e. circuit breakers and fuse boxes) to minimize any potential hazards that could arise due to the overload. These safety features are often mandatory, and can do a lot to prevent accidents from happening.
By knowing how to handle current overloads at home or at work, you can not only make sure that you minimize any potential damage, but also keep people nearby from getting hurt.
1. Know the amperage of fuses and circuit breakers
The amperage is a term used to describe the strength of an electric current, and is measured in amperes, or amps, in most modern devices and circuit breakers.
To prevent another electrical overload at home or at work, you should find out how much amperage your fuses and circuit breakers have, and these are often loaded up to eighty percent of their rating.
Put simply, a circuit breaker with a capacity of twenty amperes will trip once the current reaches sixteen amperes. Circuit breakers that keep tripping violate this rule, in which case you should contact a power trip technician in Singapore to have it checked.
2. Find out which circuits connect to which outlets/rooms
Once you’ve successfully managed to find out which circuits in your home or office keep on overloading despite how many times you changed the safety fuse, the next step you should take is to find out where the circuit connects to.
After finding the overloading circuit, switch off these electrical works. Shut down and pull the plug on all devices that happen to be connected to that circuit to minimize the risk of an electrical or fire hazard at work or at home.
Business owners and homeowners in Singapore alike can easily access their circuit legend from their office or house’s plans in order to find out where this is.
(Tip: You can use an electronic device to test if there is still power in the outlets that are directly connected to the overloading circuit.)
3. Add all your appliances’ and devices’ amperage
Proceed to plug in your appliances and switch on the breakers slowly after determining where the overloading circuit is. Be sure to take note of their amperage when you do so (ideally, there should be a sticker on your appliances that states the amount of amperage they have) and write them down.
Once you’ve added the amperage of your appliances and devices, proceed to compare this number with the maximum allowed amperage of the circuit and the circuit breaker. If the amperage of your appliances exceeds that of the circuit’s allowed amount, try shutting them down when not in use.
As much as possible, avoid using many appliances that need to be plugged in when you find that there is a circuit at home or office that is in danger of a potential electric overload, and be sure to call a licensed electrician service in Singapore when this happens.
4. Consult a professional electrician services
Electricity can both be extremely useful and extremely dangerous at the same time, and while using electricity for your appliances can be quite simple, don’t hesitate to call a professional should a problem arise.
As much as possible, call a professional electrician right away when you find yourself encountering this problem in order to avoid any potential hazards that could arise, and during the initial assessment, be sure to unplug any and all appliances that you’re not using.
A good electrician will be able to assess why the circuit is overloading as well as give you helpful advice on how to take the necessary measures to keep this from happening again, and even make sure that all your cables, wiring, and fixture installations are working properly.
Hiring an electrician services can also help you get your electrical works up-to-date to keep it run as smoothly, efficiently, and as safely as possible.
Your responsibility as a business owner or a homeowner is to be able to find and fix potential hazards in your office, especially electrical ones, such as a loose or cut wire that needs to be joined back together.
While there are some problems that you can fix yourself, there are definitely other bigger and more dangerous hazards that could cause a danger when handled poorly, and should be best left to professional services.
With a professional service helping out your business, you minimize risks for your business and get the most out of your electricals and equipment, all with the benefit of fast work and guaranteed results to ensure that your home or office is safe and ready to take on your needs.
Depending on the kind of electrical problem that you have for your home or office, you might even want to contract a professional firm that is available on call 24/7 to solve your electrical problems.